Meet the BodyScrub, the new generation of clay removal- Faster, Easier, Safer!
The BodyScrub Clay Pad easily removes surface contaminants from automotive paint, glass, moldings, and plastic, using rubber polymerized technology. Place the pad on the velcro backing plate of a dual action orbital polisher, and use your DA polisher to pull out or abrade rail dust, overspray, and other contaminants that bond to the vehicle's surface. The pad covers more area faster, than a clay bar, and lasts up to 5 times longer. The polymerized rubbers not only more durable than clay,but if inadvertantly dropped, just rinse clean with water. Also, when using clay, the metal particles are picked up and kneaded back into it, so when do you decide to draw the line and throw it away? With the clay pad, just rinse off. And, it's easier to store! 6" in diameter.
Use PDP's WS1 Wonderspray as the perfect clay lubricant, spraying the pad and the surface, keeping your surfaces lubricated while using the pad. For a quick one-step clean and wax, use with PDP SW89 BodyGloss.
Directions: Wash vehicle, to remove road dirt and larger contaminants. Use PDP R95 SuperSol or R125 Concentrated Orange to remove any tar or grease. Spray WS1 Wonderspray on the rubber polymerized side of the BodyScrub, and also mist evenly on the vehicle surface, so you can glide the BodyScrub freely across the surface. Polish the surface with your DA Polisher using light pressure and low speed. Wipe residue off vehicle surfaces with a clean dry microfiber towel. Check the clay side of pad frequently, misting with WS1 Wonderspray, or rinsing with water, to remove any contaminants. For a even more thorough deep cleaning of the surface, apply PDP's R200 Iron Melt and rinse, removing all ferrous particles, that may still be caught in the paint.