PERPETUAL FUSION GRAPHENE

• Graphene Ceramic Spray Coating
• Easier to Apply than most Ceramic Coatings
• More Resistant to Water Spots

Perpetual Fusion Graphene is a lower resin loading version of the Perpetual Graphene 10H Coating.

It offers a highly durable, hydrophobic finish with 12-15 month durability, in a very user-friendly ceramic coating.  

Provides the user with a very wide window of time, to level the product. Very easy to apply uniformly, and very easy for a first time user to apply! 

A true graphene ceramic coating for the entry level enthusiast, producing a slick, glossy, deep shine and a hard, scratch resistant finish, and a self-cleaning hydrophobic effect on water and dirt.

For best results, all coatings should be applied to a perfectly clean finish. The durability and longevity of the coating depends on how well it bonds to the surface, and if any contaminant is in the way, it prevents a solid bond.   Wash with a ph neutral soap or ph neutral foam soap, then apply an iron remover and use a clay pad or similar to remove all contaminants embedded in the paint.  You can then inspect for scratches and remove with wet sanding or orbital polishing procedures.  A scratch will be magnified by the coating, as well as the gloss.   Then use a panel wipe product to remove any polish residue from the paint. Fusion Graphene can be applied without going thru these steps. but if these steps are followed, you will get the best long term results.

Now spray or apply onto a microsuede applicator, and apply to the finish in a 6 ft by 6 ft area or larger. Flash time will vary, according to temperature and humidity of the detail bay. When the Fusion Graphene coating "rainbows", level across the surface by lightly dragging an edgeless waffle microfiber across the area, then finish leveling with a edgeless Korean coral fleece microfiber.